The Emotiva ET-3+ Trigger Sequencer is an essential device for enhancing the flexibility and control of your preamp or processor’s trigger functionality. It enables you to manage up to three trigger-enabled devices from a single 12 VDC trigger output. Automatically activate all devices at once or sequentially at three-second intervals to reduce power draw.
Key Modes:
Trigger Mode:
- When a trigger signal is received by the ET-3+, the three Trigger Outputs will activate sequentially at three-second intervals, starting with Output 1. This prevents excessive power draw from activating multiple devices simultaneously.
- The Trigger Outputs will remain active as long as the ET-3+ continues to receive a trigger signal. When the trigger signal is removed, the Trigger Outputs will deactivate sequentially in reverse order, starting with Output 3, at three-second intervals.
On Mode:
- When AC power is applied to the ET-3+, the three Trigger Outputs will deliver a trigger signal sequentially at three-second intervals, starting with Output 1, to avoid excessive power draw.
- All Trigger Outputs will deactivate almost immediately when AC power is removed. If only one or two devices need to be activated, you can utilize a three- or six-second delay by using Output 2 or Output 3.
Comes with supplied universal 12 VDC AC power adapter.
